Calculadora de vallado

Cómo funciona esta calculadora

Panels = round up(run length / panel width). Posts = panels + 1. Postcrete bags = round up(net hole volume x posts / bag yield), where net hole volume is hole volume minus the post volume it displaces.

Ejemplo resuelto

A 12 m run with 1.8 m panels needs 7 panels and 8 posts. With 30 cm x 60 cm deep holes and 10 cm posts, that is 15 bags of postcrete.

Suposiciones a comprobar

The run is straight, with one post per panel plus one closing post (no corners or gates counted separately).
Posts are treated as square in cross-section, centered in a round hole.
Postcrete yield varies by brand; use the figure on the bag.

Lee la metodología de cálculo y control de calidad →

Preguntas frecuentes

What is postcrete?

A fast-setting, pre-mixed concrete sold in bags for setting fence and deck posts without separately mixing sand, aggregate, and cement.

Do corners or gates change the post count?

Yes - this calculator assumes a single straight run. Add extra posts manually for corners, gate posts, or return runs.

Can I skip the concrete and use a post spike instead?

Yes. Set post width to 0 to model a footing-only hole, or ignore the postcrete output if you are using metal post supports instead.